CERAMICSPEED PF30a Shimano Coated Bottom Bracket Cups

Original price was: £399.49.Current price is: £97.99.

100% Quality Satisfaction

Efficiency meets excellence in customer care.

The Quality Choice for Smart Shoppers

Quality You Can Count On

Pf30a Bottom Bracket For Shimano:

– Pf30a Is A Cannondale-Specific Standard For Their 73mm Wide Bottom Bracket Shells. This Ceramicspeed Kit Makes It Possible To Install Shimano And Other 24mm Diameter Thru-Axle Cranks Into A Cannondale Frame.
– Ceramicspeed Bearings Come Installed In Two Cups And Are Connected Through The Shell Via A Spacer Tube. There Are Versions With Standard And Coated Bearings. Both Have Super Round Ceramicspeed Balls And Hardened-Steel Races. The Ceramicspeed Coated Have An Additional Attribute: A 3-Micron Thick Metallic Layer Over The Races. This Addition Makes The Races Harder And Smoother, Lowering Drag And Increasing Life.

In The Box:
– 2 Ceramicspeed Bearings Pressed Into Cups.
– 2 Installed Dust Covers.
– Spacer Tube.
– All Round Grease.
– Sticker Sheet.

Technical Data:
– The Unique Pf30a Shell Is 73mm Wide, 46mm Diameter. These Cups And Bearings Adapt The Shell So It Is Compatible With Shimano, Fsa, And Others.
– 0.3-.04 Watts Of Frictional Drag Is The “Cost” Of Our Ceramicspeed Standard Bearings. That’S A Reduction In Drag Of 75% Compared To Stock Bottom Brackets. This Is The Result Of Great Design: Hardened-Steel Races Combined With Ceramicspeed Balls That Are 100% Smoother And 15% Harder Than The Ceramic Competition. They Also Last Longer.
– The Ceramicspeed Coated Bearings Last Even Longer And Feature Even Lower Drag. Life Increases By 60% And Drag Drops By 50% Compared To Our Ceramicspeed Standard Bearings.
– All Round Grease Comes Pre-Installed In The Bearings. It Can Be Replaced For Lower Drag Race Day Grease, Or Higher Durability Long Life Grease, Which Adds A Bit Of Drag But Stays In When Riding Through Messy Conditions.

Installation Of Pf30a Bottom Bracket For Shimano:
– If You Don´t Have Any Experience Installing Bottom Brackets And Bearings, We Recommend That You Have Your Local Bike Shop Fit Your New Bearings
Maintenance Of Ceramicspeed Bottom Brackets:
– We Recommend That You Follow Our Instructions On How To Maintain Your Ceramicspeed Bottom Brackets To Achieve The Lowest Friction And The Best Longevity.